Product Details
Sinergy Has Reimagined Solar Inverters with the New Bilz Series with first-in-segment features
- But What’s So Special? A brand new “Solar Maximizer”
- No other Inverter has an innovative feature to bring the best out of your Solar Panels.
- No other inverter in its class can run entirely on Solar and give you practically a 0 Electricity bill.
- This feature allows users to use maximum Solar Power from the Solar PV panels and reduce dependency on Grid Power.
- It will not only reduce the electricity bill but also help save the environment. – Introducing All new Solar Bliz Series- A Modern Pure Sine Wave Solar Inverter / UPS range, endowed with first-in-segment features
- The pure Sine Wave output is Clean, Regulated, Completely Stable, Distortion Free and Safe for running the most sophisticated and sensitive modern appliances.
- Based on Advanced / Next Gen DSP technology, Bliz ensures the highest Safety and efficiency in the class
MODEL: Sinergy – Bliz 900
Nominal Input Battery Voltage: 12 V
Solar Charger Rating: 30 A
INPUT PARAMETERS
Nominal Input Battery Voltage: 12 V
Main Input Voltage Range (UPS Mode): 180 VAC – 265 VAC ± 5 VAC
Main Input Voltage Range (Normal Mode): 100 VAC – 280 VAC ± 15 VAC
BATTERY CHARGING
Max. Grid Charging Current to Battery: 15 A
Max. Solar Charging Current to Battery: 30 A
MODES
Energy Saver Mode: By Default (No Switch)
Solar Charging Selection Mode: NA
Grid Charging ON/OFF Mode: NA
UPS/NORMAL Mode: Via Switch (Back Side)
OUTPUT PARAMETERS
Waveform Type: PURE SINE WAVE
Output Voltage Regulation: 200 VAC ± 10%
Output Frequency: 50 Hz ± 0.5 Hz
Peak Efficiency (with linear load): > 73%
Distortion (THD): <3% on linear load
Overload Protection: Provided at >100% with Auto Reset
Low Battery Protection: Provided with Auto Reset
Short Circuit Protection: Provided at >300% with Manual Reset
Over Temperature Protection: Provided at >85 Degree ℃
CHANGE OVER TIME
In UPS Mode: <14 milliseconds
In Normal Mode: <50 milliseconds
BATTERY PARAMETER (PER BATTERY)
Boost Voltage: 14.4 VDC ± 0.2 VDC
Float Voltage: 13.5 VDC ± 0.2 VDC
Low Battery Cut: 10.4 VDC ± 0.2 VDC
Battery Type: 12 V (100AH to 300AH)
SOLAR CHARGE CONTROLLER
Type: PWM
Solar Input Voltage range ( Vmpp ): 15V – 30V
Max Solar DC Input Voltage ( Voc ): 37 V
Maximum Solar Array: 500 W
Max. Solar Current: 30 A
ENVIRONMENT
Forced Cooling: Through Cooling FAN
Humidity: 0-90% Non Condensing
Operating & Storage Temperature: 0-45℃
DISPLAY PARAMETERS
Display Type: LED Display
Parameters: Solar ON, Mains On/Fuse Blown, Indication, Battery Charging / Charged, Back-up Mode, Low Battery Protection, Overload/Short Circuit Protection
Connectivity: Bluetooth / Wifi (Optional)
DIMENSIONS (without packing)
Length: 275 mm
Width: 270 mm
Height: 133 mm
MAJOR BOM PARTS
Battery Wires: Aluminum
Transformer: Aluminum
Output Socket Type: Universal
Mains (Grid) Top Type: British (Flat Pin)
Battery MCB: No
Solar MCB: No
Grid MCB / Fuse: Fuse
By-Pass Switch: No
Note: Specifications and models subject to change without prior notice.
